Tackle Work Item Rss Feed

Created Issue: Web Server Installation Problem [26367]

SQLServerGuru — Mon, 01 Mar 2010 17:51:39 GMT

I successfully ran the installation process but when I attempt to access the web site I get this message: "Cannot use 'partitionResolver' unless the mode is 'StateServer' or 'SQLServer'." I am running Windows Server 2003, IIS and SQL Server 2008. The error message points me to a line (209) in the configuration file where it sure looks like the sessionState mode is "SQL Server" so I don't know what the problem is. Any help is appreciated.

Created Issue: Welcome: as ReadOnly - Cannot gain admin access after install

mengshun — Thu, 07 May 2009 20:16:56 GMT

I installed Tackle on our Windows 2003 SP2 web server. The
installation went well - no errors or warnings encountered.

The database was installed on a Windows 2003 server with SQL Server
2005. The database name is Tackle. I entered my SQL Server user name
(myUserID), which is incidentally my NT domain user ID as well.

When I invoked the main web page the first time, the application
displayed a Tackle session timed out error message. Since then, when
I go to the home page, I have minimal rights - like guest mode.
With tne updated master pages, this is what I see in the right hand corner of the page:
Welcome: as ReadOnly

Thanks in advance!

Commented Issue: Configuration SNAFU? (ReadOnly)

sbhandari — Tue, 10 Feb 2009 05:06:46 GMT

We're just getting started with Tackle. We installed it, we can browse to the home page and help page (for example), but the login indicator always reads: Welcome: <NT username> as ReadOnly (see attached screenshot)

The web server is on our domain, we have tried both local machine and domain accounts, the domain accounts are members of the local Administrators group -- and there is no mention anywhere on the CodePlex site (in Discussions or Issue Tracker) of this problem.

Thanks for any insights.
Comments: ** Comment from web user: sbhandari **

Can you please share what did you do to get rid of the "ReadOnly" problem. I checked the tblUser. The Admin user has permission level of 1 which is equivalent to administrator.

Thanks

Saurabh Bhandari
Flair IT Solutions Pvt. Ltd.
Indore, India
www.flair-solution.com

Created Issue: Session state can only be used when enableSessionState

rgerla — Fri, 21 Nov 2008 08:44:06 GMT

Hi,

directly after installing the product I got 2 errors, the first one was rather easy to handle since the system had problems with the xmlns entries in the web.config. Removing them solved that problem, but I got another one back and till now I haven't found a way to solve this. The server I'm using is a windows 2003 standard server with service pack 2.

Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration>\<system.web>\<httpModules> section in the application configuration.

Did I forget something during installation, or is there something else what I can do to solve this?

greetings,

Created Issue: Need to present diffrent backColor for complete rows in Backlog entry/reports and in Sprint entry/reports

Shuki — Fri, 18 Jul 2008 13:47:45 GMT

Need to present diffrent backColor for complete rows in Backlog entry/reports and in Sprint entry/reports

CREATED ISSUE: Error viewing reports

pshutchinson — Mon, 14 Apr 2008 09:07:17 GMT

I have installed Tackle on a web server that already had SQL Reporting Services 2005 (SP3) installed. Reports in reporting services are displayed fine. Tackle works fine for all the database grid pages, but when trying to view any of the reports I initially received a dotnet error stating it could not find the ReportingServices.Common.WebForms.dll assembly. I noticed that this file was not in the Bin directory of Tackle, I copied it in this folder from my Reporting Services installation and now i get past this error but receive an error stating it failed because:

Failed to load expression host assembly. Details: Could not load file or assembly 'expressionhost19e2b216e83d4bad90e785e010eec493, Version=10.7.50727.42, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)

any ideas??

COMMENTED ISSUE: Configuration SNAFU? (ReadOnly)

MichaelW — Wed, 26 Mar 2008 22:41:54 GMT

I found the solution by reading some of the comments in the Discussion area. Basically, the installation did not go right (someone else on the team did that part...). I found the tblUsers, made the needed edit to get the Administrator to be recognized (first entry), etc. BTW, I got a very good/quick response from Sean Jenkin -- hats off for agile monitoring! I think this set up is trickier than it should be -- a new Help topic or a link to the Tackle online notes would be very useful. For now... I'm a relieved camper. Cheers.

CREATED ISSUE: Configuration SNAFU? (ReadOnly)

MichaelW — Wed, 26 Mar 2008 21:30:47 GMT

CREATED ISSUE: Installation Error

logicaldna — Tue, 25 Mar 2008 09:29:25 GMT

When I run the msi file I dont see the language/numeric format for selection, the drop down is empty.
when I resume the installation then I get an for DBSetup.sql on line 13, please see the file attached

CREATED ISSUE: Download incomplete

rastirling — Wed, 12 Mar 2008 03:03:36 GMT

Downloading the Installer and only get 1.1mb instead of 4mb - consequently the installer fails

COMMENTED ISSUE: British date error when adding Product Entry

tinu44 — Thu, 10 Jan 2008 12:46:26 GMT

In the Product Entry page, the date appears to be displayed in British format (dd/mm/yy) - however, when clicking "Apply", an "Arithmetic overflow error" is returned if same UK format is submitted. Submitting the date in US format avoids the error, but then shows a "*#" next to the date entry (suggesting it's in the incorrect format?"

This fresh install of Tackle 1.02 with the Master Page update is running on Windows XP Pro (2002) with IIS. The browser is Firefox 2.0.0.11 (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.8.1.11) Gecko/20071127 Firefox/2.0.0.11)
Comments: ** Comment from web user: tinu44 **

I was able to work around the problem by replacing the "Release Date" Textbox with a Calendar control.

To do this, change the following lines in ProductEntry.aspx:

original version (lines 51-59):
==============================
<EditItemTemplate>
<asp:TextBox ID="TextBox2"
...
</EditItemTemplate>
==============================

replace with:
==============================
<EditItemTemplate>
<asp:Calendar ID="Calendar1" runat="server" SelectedDate='<%# Bind("ReleaseDate") %>'></asp:Calendar>
</EditItemTemplate>
==============================

COMMENTED ISSUE: British date error when adding Product Entry

tinu44 — Thu, 10 Jan 2008 12:37:43 GMT

Same problem with "de-CH" culture (which uses dd.mm.yyyy).

CREATED ISSUE: British date error when adding Product Entry

deanupton — Wed, 09 Jan 2008 18:21:00 GMT

CREATED ISSUE: Installation: Error 27506, DBSetup.sql line 73

RogerCoram — Thu, 03 Jan 2008 16:34:54 GMT

Hi,
I'm trying to install Tackle on a Windows 2000 machine with SQL Server Express 2005 installed. During installation I get the attached message, stating there's an error on line 73 of DBSetup.sql (15233). According to Microsoft's Troubleshooting Database this is an issue with SQL specific to Server 2005:

"TSD4001: Property cannot be added. Property 'ExtendedPropertyName' already exists for 'XMLIndexName'. (SQL error = 15233)".

There's a recommended solution involving editing the .sql but I'm not sure if this is simply down to a config. issue somewhere. Any ideas?

Thanks.

CLOSED ISSUE: Error 27506 during installation

seanjenkin — Thu, 01 Nov 2007 01:05:08 GMT

Hi
I am trying to install TACKLE on a box running on Windows 2000 Professional and has the IIS configured to port 8080 and also has SQL Server 2005.

I get an error when executing dbsetup.sql (line 13) saying '0' is not a valid official language.

Is this something to do with the TACKLE installation or is it the SQL Server 2005 installation that is causing the problem ?

Thanks in advance
Prabhat
Comments: Glad to hear you got it working. We have not done any testing against windows 2000 so there may be other issues you may find.

CLOSED ISSUE: Scrum team shows wrong product backlog list

seanjenkin — Thu, 01 Nov 2007 01:04:19 GMT

When editing Scrum teams page, the listbox under Product backlog shows Scrum team list instead of product backlog list. Any idea when this will be corrected and patched?

COMMENTED ISSUE: Scrum team shows wrong product backlog list

seanjenkin — Thu, 01 Nov 2007 01:03:34 GMT

When editing Scrum teams page, the listbox under Product backlog shows Scrum team list instead of product backlog list. Any idea when this will be corrected and patched?
Comments: ** Comment from web user: seanjenkin **

This isn't a bug. The "Product Backlog" on the Scrum Teams page refers to which "Master Backlog" that is associated with the team. It doesn't refer to one of the products you can define on the products page.

CREATED ISSUE: Scrum team shows wrong product backlog list

byju75 — Fri, 26 Oct 2007 07:07:43 GMT

When editing Scrum teams page, the listbox under Product backlog shows Scrum team list instead of product backlog list. Any idea when this will be corrected and patched?

COMMENTED ISSUE: Error 27506 during installation

prabhats — Mon, 15 Oct 2007 10:12:43 GMT

Just figured out that there was some kind of a display problem with the dropdown boxes of the installer, (the drop down list shows-up fine on a windows xp box) on windows 2000 - I didnt figure out the reason for this behavior but the arrow keys do their job well and I was able to select "ENGLISH" from the list which "is not visible". The installation was successful. It is perhaps some bug with Windows 2000 Pro +SP4 OR RealVNC which I had been using for the installation

CREATED ISSUE: Error 27506 during installation

prabhats — Mon, 15 Oct 2007 09:32:28 GMT